There are many process grinding processes involved in the manufacture of a connector, and the insertion force test is one of the more important aspects. The number of insertion and removal forces of the connector product directly determines the service life of the product, so the insertion force test process must not be sloppy. The following experts will give you a detailed description of the test process for connector insertion force.

Experts pointed out that the plug-in force test process of the connector mainly starts from four aspects: test purpose, pre-test preparation, test method and test precautions. The specific contents are as follows:

1. Insertion force test purpose

The purpose of the plug-in force test of the electronic connector is to specify a standard method for determining the required insertion force between the electronic connectors or the insertion and removal force required for the protective cover and the connector.

2. Preparation before insertion and extraction test

At the time of testing, the test sample consisted of a plug and a contactable end socket, and the samples must match unless otherwise specified. The sample shall consist of all available hardware including the core, terminal, iron shell, shield, screw or guide. The auxiliary clips, jigs, etc. used should be prepared before testing.

Three. Insertion force test method

The insertion force test is to place the two pluggable electronic connectors in the initial position of the mechanical insertion, and the readings of the force gauge and the torque gauge are both zero. Fully insert the connector at a progressive force rate as described in the specifications and record the insertion force peak. The pullout force test is to fully pull out the plug connector at a progressive force rate as described in the specifications, and record the pullout force value.

Four. Insertion force test notes

In the test, the dynamometer dial should be placed in the appropriate position of the connector so that the reading pointer is in the middle of the gauge, such an operating gauge can be accurate to ± 2%. Samples do not require any method of lubrication or cleaning unless otherwise stated in the specification.

After reading the above, you should have a basic understanding of the "testing process of connector insertion force", more documentation on the plugging force of the connector, the electric bee optimization team will continue to organize and publish on the information channel, interested Users remember to pay more attention to our website dynamics. If you need to purchase electronic connector related products, please call our hotline: 400-6263-698, professional engineers are free to serve you. The electric bee is electronically preferred, and all the connector products provided are in line with domestic and international industry standards. The insertion and extraction force test is strict, and the product quality is reliable, which is worthy of your trust.